HomeBuses and coaches

Solution · Buses, coaches and shuttles

Automatic passenger counting for buses and coaches.

A 3D counting sensor above each door, an on-board computer-router and analytics software: 2FLOW measures every boarding and every alighting, stop by stop, and sends the data to your operations in real time, whether factory fit or retrofit.

Request a demo
© Snoopy 31 · CC BY-SA 4.0

What you measure

Every passenger, at every door and every stop.

01

Boardings and alightings

By door, stop, trip and line, timestamped and geolocated.

02

On-board load

The occupancy rate of each vehicle in real time, with an alert in case of overcrowding.

03

Origin-destination

Origin-destination matrices reconstructed line by line, continuously and without manual surveys.

04

Passenger profiles

With EYES 3 AI: adults, children, wheelchairs, pushchairs and bicycles are told apart.

The 2FLOW chain

From sensor to API, a single solution.

  1. 1

    EYES 3 AI at every door

    Wide-angle (135°) 3D stereo vision and on-board AI; certified accuracy above 98%; 250 g; EN 50155 certified.

  2. 2

    BRAIN on board

    The computer-router aggregates the counts from each door, geolocates them and transmits them over 4G.

  3. 3

    CARE for analytics

    Ridership, load and origin-destination matrices in real time, plus remote equipment monitoring.

  4. 4

    APIs for your systems

    ITxPT-compatible real-time and historical APIs: AVL system, passenger information, transport authority tools, open data.

Your fleet

New or in service, without taking your vehicles off the road.

01

Factory fit

The equipment is installed by the manufacturer or bodybuilder while the vehicle is being built.

02

Retrofit

Vehicles already in service are equipped on site; the sensors are then configured and updated remotely.

03

Interconnection

The data feeds your AVL system and passenger information: Pysae, Zenbus, Hubup, Systrans, Hanover, ISFM, Navocap, INIT.

From pilot to roll-out

A five-stage project, acceptance testing included.

  1. 1

    Preliminary design

    Fleet, door configurations, systems to interface with and schedule.

  2. 2

    Pilot

    A few vehicles equipped to validate the installation and data flows.

  3. 3

    Acceptance testing

    Automatic counts compared against a manual reference, using a method agreed in advance.

  4. 4

    Roll-out

    Fleet-wide installation, interconnections and CARE training for your teams.

  5. 5

    Follow-up

    Remote monitoring, regular audit campaigns and support throughout the contract.

In the field

Deployments documented by local authorities.

Niort Agglo · Tanlib network

368 passengers counted against 371 counted by hand

99.2%reliability on the published example (one vehicle, one week)

On around ten coaches tested since 2022, the operator compared the automatic counts with a manual count on board. Published example: in week 38 of 2023, on a vehicle serving suburban lines 21, 22 and 24 and a school service, WEBREATHE counted 368 passengers against 371 counted by hand.

  • Suburban lines and school service
  • Since the new public service contract, WEBREATHE technology on 100% of the fleet, both in-house and subcontracted
  • Two campaigns cross-checking against manual counts planned every year

Métropole Aix-Marseille-Provence · Salon Étang Côte Bleue network

46 vehicles equipped, data for three departments

46selected vehicles fitted with counting sensors

The concession holder's report describes how marketing, service control and operations use the WEBREATHE tool: ridership surveys, fare evasion control and real-time load monitoring.

  • Equipped lines include Zenibus, lines 11, 12 and 4 in the zone Étang and the Salon-de-Provence shuttles
  • WEBREATHE sensors are one of the four sources used to measure ridership

Figures reproduced as published by local authorities and their operators; the links lead to the original documents.

Go further

Prepare your passenger counting project.

Let's look at equipping your fleet. An expert will get back to you.

Request a demo